Loop Knots for Ice Fishing: Why They Work and How to Tie Them
A clinch knot pins your jig to the line. A loop knot leaves a small open loop at the eye, so the jig or spoon can pivot and swing on its own. That's the whole trick, and on the ice it matters more than you'd think, because you're working a bait straight up and down with tiny rod movements.
Why loop knots help on the ice
- Free action: a horizontal jig hangs level and pivots instead of tipping nose-up when the line pulls on it from one fixed point.
- Spoons flutter wider: on the drop, a loop lets the spoon swing and wobble instead of being steered by the knot.
- Small shakes carry through: little quivers from the rod tip reach the bait instead of getting soaked up by a stiff knot.
- No retying to fix the hang: a clinch can slide around the eye and leave the jig hanging crooked. A fixed loop can't.
When to use a snap or a clinch instead
- A snap (small cross-lock or round-nose snap): when you swap baits all day, especially spoons and rattle baits that already have plenty of action. A snap is a loop you don't have to tie. Use the smallest one that's strong enough, and skip it on tiny panfish jigs, where its weight changes how they hang.
- A clinch (improved clinch or Palomar): on vertical jigs and tungsten panfish jigs that are made to hang under the knot, and when the bite is so light that you want the most direct feel. Also if you're tying in the cold and can't manage a loop knot cleanly. A clean clinch beats a sloppy loop.
Rapala knot
A non-slip loop tied right to the lure. It was promoted for Rapala's own baits.
▬ Standing line (to your rod) ▬ Tag end (the loose end you tie with)
- Tie a loose overhand knot in the line, leaving roughly 6–10 inches of tag end. Don't tighten it.
- Pass the tag end through the eye of the jig, then back through the overhand knot.
- Wrap the tag end around the standing line three times.
- Pass the tag end back through the overhand knot, then through the loop that the wraps just formed.
- Wet the knot, then tighten it by pulling the jig and the standing line. Snug the tag, then trim it.
Non-slip (Kreh) loop knot
Lefty Kreh's version of the same idea, and the one I reach for most. It's slimmer, its tag end points back toward the hook so it's less likely to catch on things, and it holds well in mono and fluoro.
▬ Standing line (to your rod) ▬ Tag end (the loose end you tie with)
- Tie a loose overhand knot about 10 inches from the end of the line.
- Pass the tag end through the jig's eye and back through the overhand knot, going in on the same side it came out of.
- Wrap the tag end around the standing line. Lefty's published guide: 7 turns for lines up to 6 lb, 5 turns for 8–12 lb, 4 turns for 15–40 lb. Most ice lines fall in the first group.
- Bring the tag end back through the overhand knot, entering on the same side it left.
- Set the loop size now while it's loose. Wet the knot, pull the tag gently to gather the wraps, then pull the jig and standing line apart firmly to seat it. Trim the tag.
Perfection loop
A small, neat loop that lines up straight with the line. It's mainly for loop-to-loop leader connections, or for hanging a jig or snap from a loop you tied ahead of time.
▬ Standing line (to your rod) ▬ Tag end (the loose end you tie with)
- Make a loop near the end of the line with the tag end passing behind the standing line.
- Make a second loop on top of the first, wrapping the tag end around again.
- Bring the tag end between the two loops.
- Pull the second (top) loop through the first one.
- Wet the knot, then tighten by pulling the new loop against the standing line. Trim the tag.
Surgeon's loop
The easiest loop to tie with cold fingers. It's basically a double overhand knot tied in a doubled line. It's a little bulkier and doesn't sit as straight as a perfection loop, but it's fast and reliable.
▬ Standing line (to your rod) ▬ Tag end (the loose end you tie with)
- Double the end of the line back on itself to form a bight.
- Tie an overhand knot using both strands together.
- Pass the bight through the overhand knot a second time.
- Adjust the loop to the size you want, wet the knot, pull everything tight, and trim the tag.
Bonus: double uni (braid to fluoro leader)
Not a loop knot, but it's how most people join braid main line to a fluorocarbon or mono leader for ice fishing. Braid is slippery, so it needs more wraps.
▬ Standing line (to your rod) ▬ Tag end (the loose end you tie with)
- Overlap the end of the braid and the end of the leader by several inches.
- Double the braid's tag end back to form a loop, then wrap it around both lines and through the loop, 6 to 8 times. Snug it down on the tag.
- Do the same with the leader's tag end, wrapping it around both lines about 4 to 5 times (fewer for heavy leader). Snug that one too.
- Wet the knots, then pull the two standing lines in opposite directions so the two knots slide together and seat. Trim both tags close.
Tips that matter in the cold
- Wet every knot before you cinch it. Friction heats and weakens line, especially fluoro. Use water or spit, not your bare hand.
- Pull it tight, then test it. Fluoro is stiff and needs a firm, steady pull to seat. Give the jig a sharp tug before you drop it.
- Trim length: leave about 1/16–1/8 in of tag end on mono and fluoro. On braid, leave a little more, or trim close and check that the knot isn't creeping.
- Line types: loop knots are best in mono and fluoro, which hold the loop's shape. Braid is limp, so a loop in braid collapses and fouls. Run a fluoro or mono leader, attach it with the double uni, and tie the loop knot in the leader.
- Loop size for small ice jigs: keep it small, about 1/8 in or a little less, just enough for the jig to pivot. A big loop on a tiny jig tangles with the hook and catches ice. Set the size before you tighten; it's fixed after.
- Check after every fish and after scraping on the bottom of the hole or the ice edge. If the line near the knot feels rough, retie.
Jigs and spoons to try them on
Horizontal jigs and spoons are where a loop knot shows the most. See ice jigs and jigging spoons on the tackle shelf. Ice Fish Deals' owner is involved with Macula Tackle, whose products appear there. More: jigs and plastics starter guide · walleye jigging spoons · rods, reels and line.
Steps checked against Animated Knots (animatedknots.com) and NetKnots (netknots.com), and Lefty Kreh's published turn counts for the non-slip loop, Oct 2026. Written in our own words, with our own diagrams.
Heads up: Ice Fish Deals may earn a commission from links on this site at no cost to you. Prices shown come from my price scanner and are accurate only as of the time stamped next to them. Prices change, so confirm at the store before you buy. Disclosure